Industrial-grade water quality analyzers delivering unmatched accuracy for environmental compliance and process control.
Our advanced sensors provide real-time insights into conductivity and total dissolved solids, ensuring your facility adheres to strict environmental regulations and operational standards.
Utilizing state-of-the-art electrode technology to detect the slightest changes in conductivity and total dissolved solids with laboratory-grade precision.
Millisecond sampling intervals enable immediate detection of contamination spikes, allowing for instant automated system corrections.
Engineered with corrosion-resistant alloys and reinforced casings to withstand the harshest chemical environments and high pressures.
Automatic self-calibration routines reduce manual maintenance and eliminate human error in measurement.
Seamless connectivity with SCADA and cloud platforms for remote monitoring and predictive analytics.
Optimized circuitry for energy efficiency, making it ideal for solar-powered remote field installations.
| Model Series | Measuring Range | Accuracy | Response Time | Output Signal | Working Temp |
|---|---|---|---|---|---|
| EcoSense-100 | 0-2000 µS/cm | ±0.5% FS | < 2s | 4-20mA / RS485 | -10 to 60°C |
| EcoSense-500 | 0-10,000 µS/cm | ±0.3% FS | < 1s | 4-20mA / Modbus | -20 to 80°C |
| PureAqua-Pro | 0.05-100 µS/cm | ±0.1% FS | < 0.5s | RS485 / Digital | 0 to 50°C |
| Industrial-TDS | 0-5000 ppm | ±1% FS | < 3s | 4-20mA | -10 to 70°C |
| SeaWatch-X | 0-100 mS/cm | ±0.2% FS | < 1s | Modbus TCP/IP | -5 to 50°C |
| AquaGuard-S | 0-5000 µS/cm | ±0.5% FS | < 2s | 4-20mA | -20 to 60°C |
| Ultrapure-Z | 0.01-1 µS/cm | ±0.05% FS | < 0.2s | RS485 | 5 to 40°C |
| OmniFlow-TDS | 0-20,000 ppm | ±1.5% FS | < 4s | 4-20mA / HART | -10 to 80°C |
Deployed 50 nodes to monitor city-wide conductivity, reducing contamination response time by 40%.
Implemented ultrapure water monitoring ensuring TDS levels stay below 0.1ppm for vaccine production.
Installed high-salinity sensors to monitor boiler feedwater, preventing scale buildup in turbines.
Optimized irrigation by monitoring soil runoff TDS, reducing fertilizer waste by 15% annually.
Critical monitoring of DI water conductivity to ensure zero-defect wafer rinsing processes.
High-precision brine monitoring to optimize reverse osmosis membrane recovery rates.
Continuous monitoring of discharge to ensure compliance with regional environmental laws.
Precise TDS measurement for USP-grade purified water systems.
Monitoring conductivity in condenser water to optimize blowdown rates.
Real-time TDS tracking to maintain ideal nutrient concentrations for crops.
Ensuring consistent water mineral profiles for standardized beverage taste.
Maintaining saline balance in fish hatcheries for optimal growth rates.
Our manufacturing process strictly follows international quality management standards for consistency.
Ensuring all electrical components meet EU safety, health, and environmental protection requirements.
All materials are lead-free and compliant with restrictive hazardous substance regulations.
Conductivity measures the ability of water to pass electrical current, while conductivity and total dissolved solids (TDS) is a calculated value based on conductivity that estimates the total mass of all dissolved solids.
Depending on the environment, we recommend monthly calibration for industrial use and quarterly for stable municipal water sources to maintain high accuracy.
Yes, our SeaWatch series is specifically engineered for high-salinity environments, featuring specialized electrode coatings to prevent corrosion.
We support 4-20mA analog, RS485 Modbus, and digital TCP/IP protocols to integrate with almost any industrial PLC system.
Conductivity is highly temperature-dependent. All our sensors include integrated NTC thermistors for automatic temperature compensation.
With regular maintenance and cleaning, our industrial electrodes typically last 2-5 years depending on the aggressiveness of the fluid.
Contact our engineers today to find the perfect sensor configuration for your conductivity and total dissolved solids monitoring needs.
