Advanced industrial instrumentation for water pollution prevention, specializing in high-accuracy activated carbon conductivity analysis and environmental monitoring.
Leading the evolution of water quality monitoring through precision instrumentation.
◆ Our company holds a dominant market position in the manufacturing of specialized instruments for water pollution prevention. We specialize in measuring activated carbon conductivity to ensure optimal filter efficiency and pollutant removal in industrial wastewater treatment plants.
◆ Our technical edge lies in hyper-accurate sensing technology that minimizes drift and provides real-time activated carbon conductivity data. This allows operators to detect carbon breakthrough instantaneously, reducing chemical waste and ensuring strict compliance with environmental laws.
The three pillars that guarantee our unmatched accuracy in water monitoring.
Utilizing nano-coated electrodes to prevent fouling in harsh water environments.
Automatic temperature compensation for drift-free measurement across all seasons.
Built for the most corrosive industrial environments using aerospace-grade materials.
Quantitative analysis of sensor efficiency and market penetration.
Comprehensive engineering data for the AC-Conductivity series.
| Model Series | Measuring Range | Accuracy | Response Time | Material | Output Signal |
|---|---|---|---|---|---|
| AC-Ultra 100 | 0.1 - 200 mS/cm | ±0.5% FS | < 1.5s | Titanium Alloy | 4-20mA / RS485 |
| AC-Ultra 200 | 0.01 - 50 mS/cm | ±0.8% FS | < 2.0s | Stainless Steel | 4-20mA / Modbus |
| AC-Pro X1 | 0.001 - 10 mS/cm | ±0.3% FS | < 1.0s | Platinum Coated | Digital HART |
| AC-Pro X2 | 0.1 - 500 mS/cm | ±0.5% FS | < 1.8s | Hastelloy C276 | 4-20mA / RS485 |
| AC-Eco S1 | 0.1 - 20 mS/cm | ±1.0% FS | < 3.0s | Industrial Polymer | 4-20mA |
| AC-Eco S2 | 0.01 - 100 mS/cm | ±1.2% FS | < 2.5s | Stainless Steel 316 | 4-20mA / RS485 |
| AC-Max Titan | 0.1 - 1000 mS/cm | ±0.5% FS | < 1.2s | Graphite Composite | Full Modbus TCP |
| AC-Nano Pure | 0.0001 - 1 mS/cm | ±0.1% FS | < 0.5s | Teflon/Platinum | RS485 / Analog |
Proven performance across diverse industries.
Implemented high-precision conductivity sensors to monitor activated carbon beds, ensuring zero contaminant breakthrough in pharmaceutical-grade water.
Integrated a network of 50 conductivity sensors to automate the replacement of activated carbon media, reducing manual testing labor by 60%.
Deployed Hastelloy-based sensors to monitor activated carbon filtration in highly corrosive acid streams, maintaining precise conductivity thresholds.
Successfully implemented conductivity-based carbon breakthrough detection to prevent dye leakage into the river system.
Tailored solutions for demanding environments.
Continuous monitoring of ion exchange resins and activated carbon polishers to prevent turbine scaling.
Ultra-pure water monitoring with sub-ppb sensitivity to ensure zero ionic contamination in wafer rinsing.
Monitoring conductivity in carbon filtration stages to ensure taste consistency and removal of organic chlorine.
High-range conductivity measurement for tailings pond water recovery and mineral concentration control.
Real-time salinity and conductivity monitoring for Reverse Osmosis (RO) membrane protection.
Monitoring boiler feed water quality to prevent corrosion in high-pressure steam systems.
Every sensor undergoes a 5-point calibration against NIST-traceable standards before shipping to ensure global consistency.
Units are subjected to thermal cycling and high-pressure immersion tests to guarantee performance in extreme environments.
Full traceability of raw materials, including Mill Test Reports (MTR) for all titanium and stainless steel components.
Our commitment to excellence is certified by international regulatory bodies.
Expert answers to common technical and commercial inquiries.
When the activated carbon conductivity increases beyond a set threshold, it indicates that the carbon media is saturated and pollutants are passing through, triggering a replacement alert.
For highly acidic or alkaline environments, we recommend Hastelloy C276 or Titanium Alloy sensors to ensure longevity and avoid electrode degradation.
Depending on the fouling rate, we typically suggest a verification check every 3 months and a full calibration every 6 to 12 months.
Yes, our instruments support 4-20mA analog outputs, Modbus RS485, and HART protocols for seamless integration with any industrial PLC or SCADA system.
Conductivity is highly temperature-dependent. All our sensors include integrated PT1000 probes for automatic temperature compensation to 25°C.
Yes, we offer customized probe lengths and mounting flange options to fit your specific piping and tank geometry requirements.
Get the most precise instruments for activated carbon conductivity and environmental compliance today.
