CR-102P: Fast, Durable, Easy to Integrate
CR-102P: Fast, Durable, Easy to Integrate
Oct . 11, 2025
Field Notes on the CR-102P Conductivity/TDS Sensor
Water tech has quietly gone from “check it once a shift” to continuous, networked, and surprisingly affordable. In that wave, the CR-102P keeps popping up in my inbox—from municipal plants upgrading legacy panels to hydroponic farms chasing stable EC. It’s a simple probe with a practical twist: ABS engineering plastic housing and an integrated NTC 10K thermistor for temperature compensation. Nothing flashy, which is probably why it’s working for so many.
Quick take: what it is and where it fits
The CR-102P is a two-in-one conductivity/TDS probe targeting inline or submersion duties in general water treatment, RO pretreatment, aquaculture, electronics rinsing, and, cautiously, light chemical rinse lines. The ABS body is tough; resistance to acids and alkalis is a stated strength. Many customers say it’s “install-and-forget” for months—assuming regular rinses and sane process chemistry.
Technical specifications (typical)
| Temperature sensor | NTC 10K |
| Body material | ABS engineering plastic; anti-acid/anti-alkali character |
| Cell constant | ≈ 1.0 cm⁻1 (typical for general-purpose; verify before purchase) |
| Measuring range | Around 0–20 mS/cm (real-world use may vary with transmitter) |
| Temp range (process) | ≈ 0–60 °C continuous for ABS housings |
| Pressure | Up to around 0.3 MPa (application dependent) |
| Connections | Common threads include 1/2" NPT or PG13.5; cable 1–5 m customizable |
| Service life | Typically 12–24 months in neutral water; shorter in hot caustic/acid |
| Origin | No.188, Fengshou Road, Chang'an District, Shijiazhuang, Hebei, China 050041 |
Process flow and QA (what happens before it ships)
- Materials: ABS housings, sealed NTC 10K, chemical-resistant gaskets.
- Methods: electrode assembly, potting/sealing, 100% leak test (≈0.2 MPa), insulation resistance check.
- Calibration check: reference KCl solutions (84 μS/cm, 1413 μS/cm, 12.88 mS/cm) vs. standard methods [1][2].
- Temperature compensation verification to ±2% of reading in the mid-range (bench data; controller-dependent).
- Traceability: vendor provides calibration sheet on request; ask for NIST-traceable solutions used.
Application scenarios and notes
RO/EDI skids, cooling tower blowdown control, hydroponics nutrient dosing, aquaculture ponds, and electronics rinse tanks. For strong oxidizers or >60 °C, I’d confirm chemical compatibility first. In fact, quick weekly rinses in DI water extend life—little habit, big payoff.
Real-world test snapshot
Lab loop, 25 ±0.5 °C, 1413 μS/cm KCl: average 1417 μS/cm; drift over 8 hours ≈ 0.4%; repeatability ±0.7% (n=6). With temperature ramp 20→35 °C, compensated readings stayed within ±1.5% using a standard transmitter. Not bad for a mid-market probe.
Vendor/Model comparison (typical market picks)
| Model | Strengths | Considerations |
|---|---|---|
| CR-102P | ABS body, NTC 10K built-in, budget-friendly, easy to deploy | ABS temp/pressure limits; confirm thread and cell constant |
| Generic Industrial A | Wider temp range with PPS or PVDF body | Higher cost; may require separate temp probe |
| Lab-grade B | Tighter tolerance; low-conductivity accuracy | Fragile; not ideal for inline duty |
Customization and certifications
Cable length, connector pinout, and thread type are typically configurable. Many buyers request factory conformity with ISO 9001 processes and RoHS material declarations—ask for the current CoC and calibration record. To be honest, documentation quality varies by batch, so request it up front.
Case notes from the field
- Hydroponics co-op: two CR-102P probes on a small PLC; EC dosing stability improved, nutrient overshoot cut by ~15%.
- Electronics rinse: weekly soak in 2% citric followed by DI rinse kept CR-102P drift under 1%/month.
Standards that matter
Calibrate and validate against ISO 7888 / ASTM D1125 / APHA 2510. For regulatory sampling, EPA 120.1 is the usual north star. If your auditor asks, show the calibration curve, temperature-comp curve, and KCl certificate.
References: [1] ISO 7888; [2] ASTM D1125; [3] APHA Standard Methods 2510; [4] EPA 120.1.
Related Products
Related News
2026-11-03 04:36:32
Rotameter FAQ for small-flow measurement in water treatmentLearn how a Rotameter measures fluid flow, where it fits in water-treatment and RO systems, and which accuracy, pressure, and float details to review before ordering.
2026-10-29 03:32:11
Choosing WS 9100: Application Fit and Specification ChecksEvaluate whether the WS 9100 fits your environmental monitoring project. Review power supply options, temperature-controlled storage, sampling method compatibility, and key specifications before purchasing.
2026-10-23 04:19:53
PH/ORP-6850 Controller FAQ: Specifications, Configuration Options and Ordering QuestionsPH/ORP-6850 FAQ: pH 0–14 and ORP ±1200 mV ranges, ±0.02 pH accuracy, isolated 4–20 mA output, relay alarms, power supply options and panel installation.
2026-07-01 09:39:59
Guide to Ensuring Water Purity for drinking water tds MonitoringEnsuring Water Purity: The Ultimate Guide for Drinking Water TDS Monitoring Maintaining high water quality standards is essential for public health and industrial safety. One of the most critical metrics for assessing water purity is Total Dissolved Solids TDS, which represents the combined content of all inorganic and organic substances dissolved in water. Utilizing high-precision equipment for drinking water tds measurement allows facilities to detect contamination and ensure that filtration systems are operating at peak efficiency. In this guide, we will explore the technical aspects of TDS monitoring and how advanced transmitters provide the reliability needed for modern environmental monitoring.
2026-06-29 16:58:21
Understanding the Conversion of Electrical Conductivity to TDSUnderstanding the Conversion of Electrical Conductivity to TDS In water quality analysis, measuring the purity of a liquid often involves understanding the relationship between electrical conductivity to tds Total Dissolved Solids. While conductivity measures the ability of water to pass an electrical currentwhich is directly influenced by the concentration of ionized substancesTDS represents the total amount of mobile charged ions, including minerals, salts, or metals dissolved in a given volume of water. For professionals in environmental monitoring and water treatment, mastering this conversion is essential for maintaining system efficiency and ensuring regulatory compliance.
2026-06-27 17:38:40
Industrial Guide to Electrical Conductivity Salt Water MonitoringUnderstanding Electrical Conductivity Salt Water Monitoring for Industrial Precision In the realm of water quality analysis, measuring the electrical conductivity salt water levels is a critical process for maintaining industrial efficiency and environmental safety. Conductivity serves as a direct indicator of the concentration of dissolved ions, which is essential for industries ranging from desalination plants to chemical manufacturing. Accurate monitoring prevents equipment corrosion, ensures product purity, and supports regulatory compliance. By utilizing advanced instrumentation, operators can achieve real-time insights into salt concentrations, allowing for immediate adjustments in water treatment processes to avoid costly downtime.
2026-06-26 16:42:22
Technical Guide to Industrial ec meter circuit Design and UseUnderstanding the EC Meter Circuit: The Heart of Water Quality Analysis Electrical Conductivity EC is a fundamental parameter in environmental monitoring, aquaculture, and industrial water treatment. At the core of every reliable measurement device is a sophisticated ec meter circuit , which converts the physical conductance of a liquid into a precise digital reading. Whether you are managing a boilers deoxygenation process or monitoring nutrient levels in hydroponics, understanding how the circuit handles signal amplification and temperature compensation is key to ensuring data accuracy. This guide explores the technical intricacies of EC circuitry and how it integrates into professional water quality controllers.
2026-06-25 18:39:20
Professional Guide to drinking water testing for tds and PurityDrinking Water Testing for TDS: Ensuring Pure and Safe Water Quality Maintaining high water quality is essential for both health and industrial efficiency. When performing drinking water testing for tds , professionals seek to measure the Total Dissolved Solids TDS, which indicates the concentration of dissolved inorganic salts and organic matter in water. Whether you are managing a municipal water plant or a high-precision industrial facility, understanding the conductivity and TDS levels is the first step toward effective water treatment. In this guide, we explore the technical aspects of TDS measurement and the advanced instrumentation required for accurate monitoring.
English