DO-6850 Continuous Dissolved Oxygen Meter Manufacturer

Q: What signal outputs does this controller have?

1) Isolated 4–20mA analog transmission for remote meter; 2) Two groups high/low 10A relay for auto equipment control; 3) Optional RS485 Modbus digital communication to PLC.

Q: How many types of DO sensors can it match?

Three types: polarographic probe (0–60℃), galvanic probe (0–60℃), high-temperature probe (0–100℃ optional). All probes use built-in NTC 10K for temperature compensation.

Q: How often to replace electrolyte and membrane cap?

Replace electrolyte every 6 months; replace membrane once broken. Re-polarize 30 mins and re-calibrate after replacement.

DO-6850

JIRS DO-6850 is an industrial panel-mount online dissolved oxygen (DO) monitoring & controller designed for continuous water quality measurement. Equipped with built-in NTC 10K automatic temperature compensation, large multi-data LCD English display, IP65 waterproof front panel, and complete signal output & relay control functions. It adopts imported core chips and supports three matched DO sensors (polarographic / galvanic / high-temperature type) to fit diverse water treatment working conditions.

Product Details

Contact Now

Product Details

Introduction:

DO-6850 online Dissolved Oxygen Meter is that our company use introduction of foreign technology to produce intelligent dissolved oxygen detector, using imported components and dissolved oxygen membrane, based on the new polarographic analysis techniques, and advanced production technology and surface-mount technology.

Using this series of advanced analytical techniques to ensure that the instrument stable and reliable long-term work and accuracy. English menu, Notepad storage of measured data, 485 communications and other functions.

Widely used chemical fertilizer, metallurgy, environmental protection and water treatment engineering, pharmaceutical, biochemical, food, farming and running water, and the continuous monitoring of dissolved oxygen.

Main Characteristics:

The large LCD display, English menu operation.

Multi-parameter display at the same time: the value of dissolved oxygen, temperature, output current, alarm points, etc. Intuitive and easy to read, and alarm for range over run.

Screen displays alarm status and accompanied by a switch ON / OFF signal output.

Automatic Temperature Compensation: Automatic 0℃ to 60℃.

Communication function (optional): RS-485 communication interface (MODBUS protocol is partially compatible), 4 to 20 mA current output corresponding to the DO value can be set freely.

Notepad: can store 50 measurements, the user can record measurement data.

Hysteresis amount can be set freely to avoid frequent switching relay action.

Watchdog function: to ensure that the instrument will not crash.

Core devices from famous foreign brands.

Restore the factory settings. Power-down protection> 10 years.

Main Technical Index

Measuring Range	0.00 - 20.00 mg /L (ppm); 0 - 200.0 ug /L (ppd), (optional); 0-60℃, 0-100℃ (optional).
Resolution	0.1 ug/L, 0.01 mg/L, 0.1℃.
Accuracy	ug/L: ±1.0%FS； mg/L:±0.5%FS， ±0.3℃.
Display	Large Screen Multi-parameters LCD
Temp. Compensation	NTC 10K, 0.0℃-60.0 ℃, 0-100℃ (optional), Automatic temperature compensation.
Current output	isolation to protect , 4 ~ 20mA signal output.
Control output	two sets of ON / OFF relay contacts, divided into the high point, low alarm signal , optically isolated output.
Communication output	Standard Modbus RS485 function to PC (optional)
Contact capacity	10A/220V AC (Resistive Load)
Output load	load <500Ω (0-10mA), load <750Ω (4-20mA)
Power	AC 220V±10%, 50/60Hz
Working environment	Ambient Temp. 0-60℃, Relative Humidity ≤90%
Dimensions	96×96×115mm(H X W X D), 0.9kgs
Hole size	91×91mm （H X W)
Installation Mode	Panel Mounted
Protection grade	IP 65 Enclosure

DO-6850 with IP6 5Enclosure and back terminals:

A-PolographicDOsensor(0-60℃)

B-Galvanic DO sensor (0-60℃)

C-High temperature DO sensor (0-100℃)

Standard configuration

◇ One DO-6850 controller

◇One electrode, An alternate membrane, one bottle alternate electrolyte

◇ Two lock plungers

◇ Operation Manual

Get in Touch

If you are interested in our products, you can choose to leave your information here, and we will be in touch with you shortly.

FAQS

What signal outputs does this controller have?

1) Isolated 4–20mA analog transmission for remote meter; 2) Two groups high/low 10A relay for auto equipment control; 3) Optional RS485 Modbus digital communication to PLC.

How many types of DO sensors can it match?

Three types: polarographic probe (0–60℃), galvanic probe (0–60℃), high-temperature probe (0–100℃ optional). All probes use built-in NTC 10K for temperature compensation.

How often to replace electrolyte and membrane cap?

Replace electrolyte every 6 months; replace membrane once broken. Re-polarize 30 mins and re-calibrate after replacement.

Related News

Nov.03,2026

Rotameter FAQ for small-flow measurement in water treatment

Learn how a Rotameter measures fluid flow, where it fits in water-treatment and RO systems, and which accuracy, pressure, and float details to review before ordering.

Oct.29,2026

Choosing WS 9100: Application Fit and Specification Checks

Evaluate whether the WS 9100 fits your environmental monitoring project. Review power supply options, temperature-controlled storage, sampling method compatibility, and key specifications before purchasing.

Oct.23,2026

PH/ORP-6850 Controller FAQ: Specifications, Configuration Options and Ordering Questions

PH/ORP-6850 FAQ: pH 0–14 and ORP ±1200 mV ranges, ±0.02 pH accuracy, isolated 4–20 mA output, relay alarms, power supply options and panel installation.

Jul.01,2026

Guide to Ensuring Water Purity for drinking water tds Monitoring

Ensuring Water Purity: The Ultimate Guide for Drinking Water TDS Monitoring Maintaining high water quality standards is essential for public health and industrial safety. One of the most critical metrics for assessing water purity is Total Dissolved Solids TDS, which represents the combined content of all inorganic and organic substances dissolved in water. Utilizing high-precision equipment for drinking water tds measurement allows facilities to detect contamination and ensure that filtration systems are operating at peak efficiency. In this guide, we will explore the technical aspects of TDS monitoring and how advanced transmitters provide the reliability needed for modern environmental monitoring.

Jun.29,2026

Understanding the Conversion of Electrical Conductivity to TDS

Understanding the Conversion of Electrical Conductivity to TDS In water quality analysis, measuring the purity of a liquid often involves understanding the relationship between electrical conductivity to tds Total Dissolved Solids. While conductivity measures the ability of water to pass an electrical currentwhich is directly influenced by the concentration of ionized substancesTDS represents the total amount of mobile charged ions, including minerals, salts, or metals dissolved in a given volume of water. For professionals in environmental monitoring and water treatment, mastering this conversion is essential for maintaining system efficiency and ensuring regulatory compliance.

Jun.27,2026

Industrial Guide to Electrical Conductivity Salt Water Monitoring

Understanding Electrical Conductivity Salt Water Monitoring for Industrial Precision In the realm of water quality analysis, measuring the electrical conductivity salt water levels is a critical process for maintaining industrial efficiency and environmental safety. Conductivity serves as a direct indicator of the concentration of dissolved ions, which is essential for industries ranging from desalination plants to chemical manufacturing. Accurate monitoring prevents equipment corrosion, ensures product purity, and supports regulatory compliance. By utilizing advanced instrumentation, operators can achieve real-time insights into salt concentrations, allowing for immediate adjustments in water treatment processes to avoid costly downtime.

Jun.26,2026

Technical Guide to Industrial ec meter circuit Design and Use

Understanding the EC Meter Circuit: The Heart of Water Quality Analysis Electrical Conductivity EC is a fundamental parameter in environmental monitoring, aquaculture, and industrial water treatment. At the core of every reliable measurement device is a sophisticated ec meter circuit , which converts the physical conductance of a liquid into a precise digital reading. Whether you are managing a boilers deoxygenation process or monitoring nutrient levels in hydroponics, understanding how the circuit handles signal amplification and temperature compensation is key to ensuring data accuracy. This guide explores the technical intricacies of EC circuitry and how it integrates into professional water quality controllers.

Jun.25,2026

Professional Guide to drinking water testing for tds and Purity

Drinking Water Testing for TDS: Ensuring Pure and Safe Water Quality Maintaining high water quality is essential for both health and industrial efficiency. When performing drinking water testing for tds , professionals seek to measure the Total Dissolved Solids TDS, which indicates the concentration of dissolved inorganic salts and organic matter in water. Whether you are managing a municipal water plant or a high-precision industrial facility, understanding the conductivity and TDS levels is the first step toward effective water treatment. In this guide, we explore the technical aspects of TDS measurement and the advanced instrumentation required for accurate monitoring.