How to Check JIRS-803C5 Fit for Outdoor Water Sampling

Nov . 16, 2026

Share:

JIRS-803C5 suits buyers who need portable outdoor sampling for pollution sources, rivers, or lakes. Check the required sampling mode, suction distance, bottle capacity, refrigeration range, power conditions, and site temperature before ordering. Its timed, time-proportional, flow-proportional, and external-control modes support several testing workflows, while optional communication and positioning functions address remote monitoring needs.

How to Check JIRS-803C5 Fit for Outdoor Water Sampling
Illustration for reference; see the product page for actual photos and specifications.

1~9999min, adjustable

Sampling interval

1 bottle, 3L capacity, PE

Sampling bottles

1~2500mL

Single sampling volume

±7%

Sampling error

JIRS-803C5 is a practical choice when one portable sampler must support outdoor work at pollution sources, rivers, and lakes. We supply it for applications including third-party testing, biological testing, drug testing, and environmental law enforcement testing. The purchase decision depends on how far the inlet is from the unit, how samples are scheduled, whether samples need refrigeration, and what records the team must retain.

1

Start with the sampling task

Choose JIRS-803C5 when the site needs more than one sampling trigger. The unit supports timing sampling, time-proportional sampling, flow-proportional sampling, and external control sampling. It can also perform single sampling and mixed sampling, so the configuration can follow either individual collection points or a composite-sample workflow.

The sampling interval is adjustable from 1~9999min. This range is useful when the collection plan changes between short monitoring cycles and longer unattended periods. Before ordering, match the interval setting to the method used by your testing team and confirm whether the site will use time, flow, or an external signal to trigger collection.

2

Check reach and sample volume

Site geometry should be checked before the equipment is selected. JIRS-803C5 has a sampling vertical height of ≥6.5 meter and a horizontal sampling distance of ≥65 meter. Measure the planned inlet position and route before purchase, including the distance from the sampler to the water access point.

The unit uses 1 bottle with a 3L capacity and PE material. Single sampling volume is adjustable from 1~2500mL. That combination suits buyers who need a portable sampler with one larger collection container and adjustable draw volumes. The selected volume should match the laboratory container plan and the expected number of collection events.

ParameterJIRS-803C5 value
Sampling interval1~9999min, adjustable
Sampling bottles1 bottle, 3L capacity, PE
Single sampling volume1~2500mL
Sampling error±7%
Proportional sampling error±8%
Vertical sampling height≥6.5 meter
Horizontal sampling distance≥65 meter
Operating temperature5°C~40℃
Operating humidity≤90%RH, no condensation
Dimensions450mmx345mmx540mm
3

Match sample handling to the process

Refrigeration is a key selection check for samples that need controlled temperature during collection. JIRS-803C5 has water sample refrigeration at (0~5)°C, and a refrigerator is available to refrigerate water samples. Check the temperature requirement of the sampling procedure and make sure the equipment location has suitable power for the selected operating arrangement.

The sampler can automatically add one type of fixative. Configurable examples include sulfuric acid, hydrochloric acid, nitric acid, and NaOH. This is suited to workflows that require chemical preservation during collection. The fixative choice must follow the procedure used by your laboratory or enforcement team, and the selected chemical should be specified when the order is prepared.

Automatic rinsing and draining affect repeated sampling. Before each session, the unit automatically rinses the tube with the water sample to be collected. After each session, it automatically drains water from the tube to prevent sedimentation and blockage. These functions suit sites where the sampler will collect separate samples over repeated cycles.

4

Review power, records, and site conditions

JIRS-803C5 uses AC220V±10% power at a frequency of 50Hz±1%. Its built-in battery can run for more than 6 hours during a power failure, with no sampling and no cooling. This makes the power arrangement an important order check for outdoor locations. Confirm that the planned supply matches the unit's power requirements and understand that battery operation does not include sampling or cooling.

The sampler stores at least 1000 sampling records and at least 1000 alarm records. Sampling records include the date and time, sampling mode, sampling volume, fixed dose, and whether sampling was successful. Power outage and power-on times are also recorded, and alarm information can be queried by time and status.

Power-off protection retains previously set parameters, sampling history, and other information when the instrument is turned off and restarted during operation. These records suit teams that need to review collection events after field work or inspect interruptions in an unattended cycle.

The operating temperature is 5°C~40℃, and operating humidity is ≤90%RH with no condensation. The enclosure dimensions are 450mmx345mmx540mm. Check both the field environment and the available installation or transport space before the order is finalized.

5

Optional functions for remote work

Remote functions should be selected according to the monitoring arrangement. Video recording is optional and captures video of the sampler top and inlet for remote viewing. Remote communication is optional and uses a mobile app for remote control. GPS positioning is optional and supports electronic fences and automatic alarms when the device exceeds a specified area. Wireless transmission is optional and uses a 4G DTU for remote monitoring and control.

These options suit distributed sites where staff cannot remain beside the sampler. Select only the functions that match the project workflow, then include them in the configuration discussion so the delivered unit matches the intended field operation.

What to weigh

Sampling workflowchoose timing, proportional, external-control, single, or mixed modes.
Site reachcheck vertical height ≥6.5 meter and horizontal distance ≥65 meter.
Sample handlingmatch 3L PE bottle, volume 1~2500mL, refrigeration, and fixative needs.
Field conditionscheck AC220V±10%, 5°C~40℃, humidity, dimensions, and optional remote functions.

Your shortlist

JIRS-803C5 automatic water sampler for outdoor pollution-source, river, and lake sampling.

Questions to settle before ordering

Can JIRS-803C5 collect composite samples?

Yes. JIRS-803C5 supports mixed sampling as well as single sampling. Mixed sampling suits a collection plan that combines portions from multiple events into one container, while single sampling suits separate event collection. The unit uses one PE bottle with a 3L capacity, so the laboratory's container and sample-handling plan should match that arrangement before the order is prepared.

Can it work during a power outage?

Yes, for more than 6 hours, but the built-in battery does not run sampling or cooling during the outage. The sampler retains its previously set parameters and sampling history when power is restored after an interruption during operation. This makes the battery useful for preserving operating continuity and records, while active collection and refrigeration still depend on the AC220V±10% supply.

What environmental conditions are suitable?

The operating temperature range is 5°C~40℃, and operating humidity is ≤90%RH with no condensation. The unit measures 450mmx345mmx540mm, which affects transport and placement at outdoor sites. Check the planned location against these conditions and dimensions, and measure the inlet route against the ≥6.5 meter vertical and ≥65 meter horizontal sampling distances.

Make the order fit the field site

Choose JIRS-803C5 for portable outdoor sampling where adjustable intervals, proportional or external triggers, refrigeration, and event records match the work method. It also suits sites that need optional remote functions. For a quotation, send the sampling trigger, inlet distances, sample volume, preservation chemical, power arrangement, and required options for your site.

The company

Hebei JIRS Import & Export Co., Ltd.

Hebei JIRS Import & Export Co., Ltd., we specialize in providing top-notch water quality analysers and sensors that meet the diverse needs of our clients. Our products include: Conductivity/TDS controllers, Resistivity controllers, pH/ORP controllers, Reverse Osmosis (RO) controllers, Dissolved Oxygen Controllers, Residual Chlorine Controllers, Turbidity Controllers, Salinity Controllers, Irrigation system controller and a variety of related sensors.…

About Us ↗Visit company website ↗

Related Products

swiper-button-prev
swiper-button-next
RO Membrane

RO Membrane

PH-6800

PH-6800

WS-9200/9250

WS-9200/9250

RO-8100

RO-8100

RO- 8200

RO- 8200

ORP-6800

ORP-6800

PH/ORP-600

PH/ORP-600

JIRS-803C

JIRS-803C

Related News

swiper-button-prev
swiper-button-next
Rotameter FAQ for small-flow measurement in water treatment

2026-11-03 04:36:32

Rotameter FAQ for small-flow measurement in water treatment

Learn how a Rotameter measures fluid flow, where it fits in water-treatment and RO systems, and which accuracy, pressure, and float details to review before ordering.

Choosing WS 9100: Application Fit and Specification Checks

2026-10-29 03:32:11

Choosing WS 9100: Application Fit and Specification Checks

Evaluate whether the WS 9100 fits your environmental monitoring project. Review power supply options, temperature-controlled storage, sampling method compatibility, and key specifications before purchasing.

PH/ORP-6850 Controller FAQ: Specifications, Configuration Options and Ordering Questions

2026-10-23 04:19:53

PH/ORP-6850 Controller FAQ: Specifications, Configuration Options and Ordering Questions

PH/ORP-6850 FAQ: pH 0–14 and ORP ±1200 mV ranges, ±0.02 pH accuracy, isolated 4–20 mA output, relay alarms, power supply options and panel installation.

Guide to Ensuring Water Purity for drinking water tds Monitoring

2026-07-01 09:39:59

Guide to Ensuring Water Purity for drinking water tds Monitoring

Ensuring Water Purity: The Ultimate Guide for Drinking Water TDS Monitoring Maintaining high water quality standards is essential for public health and industrial safety. One of the most critical metrics for assessing water purity is Total Dissolved Solids TDS, which represents the combined content of all inorganic and organic substances dissolved in water. Utilizing high-precision equipment for drinking water tds measurement allows facilities to detect contamination and ensure that filtration systems are operating at peak efficiency. In this guide, we will explore the technical aspects of TDS monitoring and how advanced transmitters provide the reliability needed for modern environmental monitoring.

Understanding the Conversion of Electrical Conductivity to TDS

2026-06-29 16:58:21

Understanding the Conversion of Electrical Conductivity to TDS

Understanding the Conversion of Electrical Conductivity to TDS In water quality analysis, measuring the purity of a liquid often involves understanding the relationship between electrical conductivity to tds Total Dissolved Solids. While conductivity measures the ability of water to pass an electrical currentwhich is directly influenced by the concentration of ionized substancesTDS represents the total amount of mobile charged ions, including minerals, salts, or metals dissolved in a given volume of water. For professionals in environmental monitoring and water treatment, mastering this conversion is essential for maintaining system efficiency and ensuring regulatory compliance.

Industrial Guide to Electrical Conductivity Salt Water Monitoring

2026-06-27 17:38:40

Industrial Guide to Electrical Conductivity Salt Water Monitoring

Understanding Electrical Conductivity Salt Water Monitoring for Industrial Precision In the realm of water quality analysis, measuring the electrical conductivity salt water levels is a critical process for maintaining industrial efficiency and environmental safety. Conductivity serves as a direct indicator of the concentration of dissolved ions, which is essential for industries ranging from desalination plants to chemical manufacturing. Accurate monitoring prevents equipment corrosion, ensures product purity, and supports regulatory compliance. By utilizing advanced instrumentation, operators can achieve real-time insights into salt concentrations, allowing for immediate adjustments in water treatment processes to avoid costly downtime.

Technical Guide to Industrial ec meter circuit Design and Use

2026-06-26 16:42:22

Technical Guide to Industrial ec meter circuit Design and Use

Understanding the EC Meter Circuit: The Heart of Water Quality Analysis Electrical Conductivity EC is a fundamental parameter in environmental monitoring, aquaculture, and industrial water treatment. At the core of every reliable measurement device is a sophisticated ec meter circuit , which converts the physical conductance of a liquid into a precise digital reading. Whether you are managing a boilers deoxygenation process or monitoring nutrient levels in hydroponics, understanding how the circuit handles signal amplification and temperature compensation is key to ensuring data accuracy. This guide explores the technical intricacies of EC circuitry and how it integrates into professional water quality controllers.

If you are interested in our products, you can choose to leave your information here, and we will be in touch with you shortly.


en_USEnglish